Indholdsfortegnelse for October 2020 i Scootering

The peaks and troughs of Covid have been a cruel mistress to us all. Lives have been lost, the globe is in turmoil, the scooter rally scene is decimated and companies across the world have suffered. Like so many other businesses, Mortons Media, owner of Scootering magazine, has had to make some tough decisions over the last six months. Our print division was affected, while the shows division became almost defunct overnight as event after event had to be cancelled... and these are only just starting again now. That has affected us all here, and those cutbacks also meant a tightening of the belt in the publishing division too… but among all this, there has been a glimmer of hope; it has been the publishing (magazine) division which remained buoyant.…

Name: Marc Leiskau. How and when did you first become interested in scooters: In the ’80s. The PX series has always been my favourite. What was your first scooter: Vespa PX80. What is your favourite style of custom scooter: As a teenager I always dreamed of a PX racer. At that time, however, I could never fulfil such a dream for financial reasons. In the meantime, the financial hurdles have been overcome and the dream has become a reality. Name of scooter & reason: The Jaguar PX – from the late ’90s to the early 2010s I worked around the Jaguar Formula 1 team and we had those branded plastic scooters from Peugeot at that time to get around the track and the pit lane. Even then the idea matured…

Painful lesson learned After many years of not riding (wife, house and kids) the imminent arrival of a Vespa Douglas Sportique post-lockdown saw me engage in motorcycle training to improve my skills and to work towards a full licence. I did my research on the local companies and selected the one that best suited my requirements. Upon reflection, I should have done just that little bit more and looked at the training school’s practice area and surface. An old set of tennis courts with crumbling tarmac is certainly not conducive to emergency stops on large motorbikes! The inevitable happened while executing an emergency stop, rider and bike parting company, culminating in injury to my right arm, damage to bike, protective clothing and helmet. Fully understanding that road surfaces could be…

Name of scooter & reason: Casual Sole – based around the Adidas 24 City Series of footwear. Scooter model: Indian Lambretta GP125. Inspiration for project: I wanted to put something I have a passion for into something else I have a passion for. Time to build & by who: About three months in total. 95% by my mate Andrew ‘Snooty’ Lee and Rob Miller, who completed the finishing touches. ENGINE SPEC Kit: TS 225. Crank: Harry Barlow pro-porting 61/10. Carb: 30mm Dell’Orto. Exhaust: Taffspeed (ceramic coated). Clutch: 46-tooth cassette. Gearbox: Indian GP200 (19-tooth front sprocket). Dyno done by: PSN (Liverpool) 19bhp – touring set-up. What brand of oil do you run: Putoline 3%. CHASSIS SPEC Tyres: Dunlop Scootsmart. Rims: SIP. Suspension: BGM (front and rear). Grips: MB. Cable brand: BGM.…

Name: Dean Wilkins. Scooter club & town: Banbury Scooter Club. First interest in scooters: Punk, Skinhead, Mod and then Scooterboy 1982. First scooter: Vespa 100. First ever rally: Torquay 1984. How did you get there: Vespa 100 from Weymouth. Any funny stories: Once went in a minibus from Weymouth to attend National at Whitley Bay – 385 miles, only to find when we got there we were a week too late. Favourite rally: Has to be IoW, due to the larger group that travel down, makes it much more of an event. Funniest experience involving scooters: Going to Tenby on the M4, three of us on scoots, two Vespas and a Lambretta chop, when we heard a large group of bikes coming up behind us in the fast lane; 30-odd…

If the Quattrini has an obvious weakness, it’s the carb rubber. No matter how well they’re manufactured, every carb rubber needs replacing sooner or later, and at around £100 a pop, the Quattrini rubber is a very expensive service item. Both Chiselspeed and LTH have produced an adaptor plate which enables a TS1 manifold to be used instead. Admittedly the adaptor plates come at a cost but it only takes a couple of seasons to see a return on that investment. We all know that carrying a spare carb rubber is a wise precaution but I let myself down on this occasion. Thankfully I’d fitted the Chiselspeed adaptor so when mine failed I could scrounge the TS1 spare that Brad always carries. If anyone still needs persuasion, try to find…

Name: Dave Turnbull. Job: Team leader, ultrasonic tester, Network Rail. Scooter club & town: Banbury Scooter Club. First interest in scooters: 1980, chap up the road had one. First scooter: Li150, bought for £5 from an old chap who’d had it in his garden for years. I only had £4, had to borrow a £1 note off my dad to get it. First ever rally: Isle of Wight 1983. How did you get there: Back of a Vespa P200E. Favourite rally: Great Yarmouth in the mid to late ’80s. Funniest experience involving scooters: Having my helmet nicked at Great Yarmouth and buying a beach ball. I cut it up and made a helmet shape, the laughs were great. Also borrowing Nick Maund’s (Ital Scooters) Lambretta chopper to go to Tenby,…

Model: 1959 Series 1 frame imported from Italy. Inspired by: Bikes bought by an early 1970s soulie for £20 from an old Mod. Time to build: Five months. Kit: Muggelo 225 ported fast tourer by DSC Darren Scott. Carb: Old-school solid mount 30mm Delly. Exhaust: BGM big box with bespoke twin pipe. Crank: SIP 60x116. Crank: BGM super strong clutch. Gearbox: Cyclone 5. Case: Uni auto casing, mag housing, sidecase fitted with Chiselspeed easy clutch. Hub: Casa Octo hub. Suspension: Protech rear shock and BGM front dampers with MB progressive springs. Build by: Darlington SC maestro Gary White, an absolute perfectionist. Paint by: Col Fitzgerald. Rusteration builds are en vogue. I wanted a period build without the rust so went for a different slant. The brief to Col, make it…

Name of scooter and reason: Ted. It just happened; Alfie named it Ted and he’d already named my Li150 Sid! Scooter model: Lambretta Li125 series 3 Date purchased and cost: 2017 £900. Inspiration for project: Bought for my son as his passion for the scooter scene is unbelievable. I gave it to him for Christmas 2019 Time to build and by who: Ellspeed Tuning and K A Bell Scooters ENGINE SPEC  Kit: 195 RT Carb: 30mm Dell’Orto Exhaust: TSR Clutch: six-plate AF Rayspeed Gearbox: Lambretta 125 Porting and dyno by: Andrew Davis at Ellspeed tuning What brand of oil do you run?: Rock fully synthetic Top speed/cruising speed: Top speed 85-90mph. Cruising around 65mph Paintwork by: Darren Hinds. Gold airbrushed decals by Lee Hope Overall cost of work and components:…

Clancy Eccles – Top Of The Ladder (Doctor Bird) Over the last few months, Doctor Bird have been reissuing the work of legendary Jamaican producer and artist Clancy Eccles, and this release brings it to an end with a very much in demand album and the last of his releases up to that date. By the early Seventies he had become one of the biggest names on the fledgling reggae scene, both as an artist and a producer. With this in mind, Trojan Records decided to gather together a collection of tracks he’d produced over the previous few years and release them as the debut album on their new Big Shot imprint. Unfortunately, at the time these tracks were seen as being dated, and in an unfashionable style, leading…

Name of scooter & reason: Everyone calls it The Beast, but I call it 230 Hybrid Scooter model: Well the frame is a 1959 series 1/2 with GP fairings etc Time to build & by who: Built by me three years on and off as always too busy Any specialised parts or mods: Rev counter and temp gauge incorporated into a small glove box, a one-off flywheel cowling made on a 3-D printer at work, with internal fan and operated switch, machined on/off fuel tap lever. ENGINE SPEC Rapido 230 Kit: Rapido 225 Crank: 60mm race crank with long rod Carb: 38mm VHSB flatside Dell’Orto Exhaust: Pipe Design Voyager Clutch: BGM Porting work by: JB Tuning What brand of oil do you run: Putoline @ 3% CHASSIS SPEC: Tyres: Heidenau…

Alex Van Dyke has been a regular competitor since 2009 but for varying reasons has yet to complete a full season. At Cadwell Alex had two machines at his disposal and was joined by his father for a special boys weekend of racing. The old fella, Larry, is an ex-racer himself, having competed in mini stocks and BHR250 special classes since the 1980s. This was Alex’s introduction to scooters, which fascinated him from the first time he saw scooters race at Lydden in 2008. He dropped his plans to go MZ racing and with dad’s support he converted a road scooter and hit the track on a Gilera Auto. Unfortunately Larry has suffered ill health and has been unable to race or travel to see racing for some time, so…

✎ Classic Scooterist, PO Box 99, Horncastle, Lincs LN9 6LZ ✉ mauspencer@classicscooterist.com ☎ 01507 529408 One of my favourites This picture is up there with some of my favourite images I took back in the day. Lyn Mifflin 1982 Scarborough rally Taken at the Scarborough scooter rally in 1982 — with Winston Findley, Mick Draycott, Linda Witt and Steve Bickers, the Peterborough crew – happy days! David Reed Random images Here’s a few random images from my days with Alfreton Swan SC in the early ’80s. Bob Miles Every picture tells a story… Happy memories from Scarborough during Easter of ’79. Melvyn Middleton Mod for life A couple of pictures of me on my PK50 in old town Croydon back in 1983 – don’t have any hair nowadays. Gary Potter…

✎ Classic Scooterist, PO Box 99, Horncastle, Lincs LN9 6LZ ✉ p ncer@classic scooterist.com ☎ 01507 529408 Flyscreens Hi Mau, I’m writing in reference to the flyscreen article in the last edition. In the early ’90s Feridax stopped producing flyscreens; the company who made them for Feridax sold us the manufacturing equipment and we immediately started production of our VE Actif flyscreens, which are manufactured to a high standard, so it would be remiss if I didn’t take issue with the generalised statement that ‘screens are poorly manufactured in detail’. My team are working on the original moulds and I take issue with that comment. I’d also add that Feridax screens, when production finished, aren’t the early one shown in the article. The chrome plastic strip was long gone and…

While in New York, he visited the New York City Police Museum in Lower Manhattan with his wife and seeing an original Spanish NYPD Lambretta on display, he decided to build a replica. However, attending the LCGB Trade and Custom Show last year in Southport, he spotted a beautiful example of just the scooter he wished to build, already on display, which somewhat pulled the rug from under his flat feet. THE FIRST, SECOND & THIRD AMENDMENTS As far as we know there have been three versions of the Slimstyle Lambretta used by the New York Police Department. The first was the Innocenti Italian-produced Lambretta Li150 Series 3, but which used the SX headset, giving the machine an ignition switch. Many of these machines had DL150 motors along with the…

“Imagine if the Government created a simple twist and go 125cc scooter class, with a power limit to, say, 50mph. That’s enough speed to keep up with traffic safely on the commute into towns and cities, but the machines are dead easy to ride and only require basic knowledge and skills to operate.” I was talking recently with friends, in regard to how people get to work in urban centres while avoiding public transport with its obvious strong possibility of spreading Covid. As a society affected by climate change we don’t really want to be encouraging individuals to use cars for commuting but we also don’t want to encourage everyone back on to public transport. It seems obvious to me therefore that encouraging people on to two wheels makes perfect…

The 1983 rally season opened with Morecambe, and we tried a new tactic that we’d seen others use: a back-up van… help if (when) any of the scooters break down and somewhere to sleep at night. We all chipped in to hire a van but when we arrived to pick the van up on Friday afternoon, the hire company, knowing who was hiring it, gave us the most clapped-out van they had; it wasn’t even taxed nor did it have working lights. We’d hired it in case any of the scooters didn’t make it so we could chuck them in the back. It now looked like we would need to hire a bigger van to chuck this one in because it didn’t look capable of going all the way to…

WIN a smart Scootering T-shirt with your photo For your chance to win a stylish Scootering magazine T-shirt, email us your HI-RES pics to: suys@scootering. com and the least crap snap wins! For full terms and conditions, visit: www.scootering.com/comptc DATA: Protection of your personal data is important to Mortons. Your data will be stored securely and only be used for the purpose of processing the competition and notifying the winners. Data will then be destroyed. Least crap snap…

Name: Mark Graham. Scooter club & town: Mansfield Monsters SC. First interest in scooters: When I was about 10 years old I became obsessed with watching the older lads riding about through town. First scooter: Vespa T5 Mk1. Favourite style of custom scooter: Custom scooters with attention to detail and where the theme flows with everything else. Chrome and engraving wouldn’t go well on Casual Sole. First rally or event: Cumby Arms/ Darlington SC 2002. How did you get there: By scooter. Favourite and worst rally/event: Not really ever had a bad rally. It’s about being with good people and friends, which make it what it is. Funniest experience with a scooter: Too many. All scooters have their days, at the time you want to throw them off a cliff.…

Name of scooter & reason: It’s a scooter, it has no name. Scooter model: PX200E. Date purchased & cost: July 2004 for £900. Inspiration for project: Originally it was going to be a 290cc water cooled Rotax, inspired by Gran Turismo Performance, then the Quattrini cylinders came along so I took the easier route of air cooled. Time to build & by who: All built by myself, the only part I didn’t do was machine the crankcase to take the wider webs of the 64mm Kingwelle crank. It took about a year to build only because I had to rebuild my Scomadi 300 that I cooked coming back from the IoW last year due to a thermistor packing up 10 miles from home. Any specialised parts or mods: The body…

Name of scooter & reason: War of the Worlds. Scooter model: PX125. Date purchased & cost: Had it in garage for 28 years. Cost nothing. Time to build & by who: About six months on and off, built by myself and Gavin Chamberlain. Any specialised parts or mods: Brand new floor and Lambretta forks, all built by Dan Jones in Nuneaton. TECH SPEC Kit: Malossi 210. Crank: Standard. Carb: Standard 24/24 upjetted. Exhaust: Simonini. Clutch: Standard, stronger springs. Gearbox: Standard. What brand of oil do you run: Rock oil, 2%. Rims: SIP tubeless on back, standard chrome Lambretta on front. Suspension: Bitubo on rear. Describe engine performance and scooter handling: Engine performance is great, no problems, handles great. Overall cost of work and components: Cost around £650 to get it…

Name: Karl Sheehan. First interest in scooters: Age 12 – a neighbour gave me a 150LD. Favourite scooter model: SX200. Favourite style of custom scooter: The 60s Dealer Specials (Originals). First ever rally: Skegness 1984. Favourite rally: Southend on Sea, as I used to live there. Least favourite rally: Clacton 1985, it was cold and wet! Favourite Scootering feature: Readers’ Rides. Favourite custom scooter of all time: Original Wildcat SX200 by Rafferty Newman. Your most recommended scooter part or related item?: Threadlock. Which insurer do you recommend?: T R Youngs/Allstyles Most useless part you’ve ever bought for a scooter?: Remade Lambretta running-in sticker (from Vietnam) which had loads of spelling mistakes. What would make our beloved scooters better?: Five-star petrol.…

Unfortunately Stef’s generosity in offering a ride on the SS wasn’t matched by the weather. I’d optimistically describe the conditions as awful. With standing water and torrential rain there could be no exploration of the machine’s sporting credentials. The first thing that struck me about the scooter was the sound. As soon as it burst into life I was transported back to the 1970s. Yes, I know the SS dates from the Swinging Sixties but by the late ’70s, when I started showing an interest in scooters, this was the noise I heard buzzing around the village. None of the ‘big lads’ could afford a new P2’ so my early memories are of SS and Rally models. They’ve a distinctive sound and once heard it’s never forgotten. Hats off to…

Both the Vespa and Lambretta can be reliable machines providing they are looked after. If they are serviced and checked at regular intervals, they should provide many thousands of trouble-free miles. Though you may want a dealer to do the annual service which is recommended, during the intervening time you, the owner, should also perform interim maintenance on your own scooter – simple procedures to make sure everything is working correctly. By doing so, any early indications of a problem can be spotted and the problem attended to, potentially preventing what may be a costly breakdown and repair further down the line. This guide is based around both the Vespa and Lambretta. There will be some subtle differences, however, both have common running gear (you know… wheels, tyres, suspension, carbs,…

When a scooter is christened with a name, it tends to reflect either the theme or the essence of what’s gone into the build. Paul Bradfield spent three years, on and off, building something of a trick Lambretta for himself. He knew what he was going to call his project, however, his mates came up with an alternative. Powered by a 230cc former sprint and race-spec engine, the Lambretta series 1 frame has been fitted with GP legshields, along with a plethora of bespoke items, so Paul decided on the simple but descriptive tag of 230 Hybrid. His mates, watching the scooter slowly taking shape, collectively came up with an equally simple and applicable alternative… The Beast. “As it’s a 1959 Series 1 frame, fitted with grand prix front fairings,…

Graham Tatton is an old friend of Scootering magazine (see main story) and enjoyed a winning weekend. “For 2020 I joined Team DSC. My production class bike had been in its tangerine paint since the mid-90s so a refresh was overdue. Scotty rebuilt the bike, checking everything over, finishing off with spare Team DSC bodywork, and fitted the multiple championship winning engine that Justin Price had used and was subsequently featured in the edition 406 of this magazine. “The refreshed motor was crisp and clean through the rev range and although slower than some of the other production bikes through the speed trap we came away with three wins so couldn't ask for more. Big thanks to Darren Scott and all at Team DSC.”…

(Hi from New Zealand) Picture (Kodachrome slide) taken at Timaru, New Zealand in 1962 when I was 19. Original colour was grey/ navy, repainted by my late brother (the original owner) and me in lemon yellow. The bright fairing trim was added from a later model; the badge was created and painted by us from seeing the badges on Piaggio scooters. We mistakenly thought the ‘P’ would become a ‘D’ for Douglas. This was my first actual motor vehicle. She was a little temperamental and wouldn’t idle properly but ran very well. I rode her to Christchurch (100 miles) where I did a rapid course at a motorcycle school (in a gravel pit) to get my full licence in six weeks. I learned from wet roads, potholes and loose gravel…

This information is provided by Stephen Hattersley, of WildWood Legal, a firm of solicitors specialising in claims for injured scooterists. Stephen, a qualified solicitor for 25 years, has been riding scooters for more than 30 years, and has acted for injured riders across the UK. He knows the tricks and pitfalls that insurers use and pulls no punches in his dealings with them. He rides to work every day and understands the challenges you face out there. Q. I was knocked off my scooter at a roundabout by a car that cut across my lane. I didn’t get his number plate. I presume I can’t make a claim? A. Wrong, you can and should make a claim. The claim will be against the Motor Insurers Bureau. They handle claims against…

No one can mistake the identity of a Formula 1 car. In the world of paintwork, their schemes are colourful, eye-catching and covered in more logos than you can shake a stick at. They need to be – the logos are of the team’s sponsors who pour in millions of dollars to keep it all afloat. All this just to have their name emblazoned across TV screens via the rear wing or side pod of the car for a couple of hours on a Sunday afternoon. Travelling at speeds of more than 200mph it’s not easy to focus a camera for long as the car flies past. Therefore, it’s critical to get the design just right so the logo has maximum exposure to the world. Teams spend huge amounts of…

Letters&emails&correspondence&questions&personals&thank-yous&comments&more Feedback, Scootering Magazine, PO Box 99, Horncastle, Lincs LN9 6LZ or feedback@scootering.com Speed and power Hi Dan, The latest edition of Scootering is as good as always and I was particularly interested in the article on Darrell Taylor’s TType Clubman. It sounds to be just what I want for a bit more go from the combo. I have tried a CST expansion box but as you say you need to be in the power band for performance and it’s not easy to stay in one with the sidecar! I will contact Darrell when they come into production. My new 300 GTS HPE is going great and the ride is excellent although for short trips I prefer a Lambretta. It is not easy to explain but with the GTS you…

Historically Mark has preferred Vespas to Lambrettas. “I don’t know why really; I think it was just that I thought Vespas were less likely to break down and would cause less trouble,” he smiled. Having previously owned the custom Vespas ‘The Business’ and ‘Lower Class’, Mark is also no stranger to the custom scooter scene; The Business had the paint and Lower Class had the engineering. In 2018 Mark sold Lower Class and started riding his partner’s scooter, a Lambretta GP TS1, which he enjoyed. Eventually he started looking for his own Lambretta and it wasn’t too long before he travelled to Gateshead to buy a grey Indian GP. Having purchased the GP he rode it for a while. “It had a decent spec and an element of tuning; however,…

Regardless of what any manufacturer says or does there are some people who’ll never accept the idea of a four-stroke auto, but their numbers are falling. Speaking as someone who owns more two-stroke scooters than is strictly necessary, I can vouch for the fact that, although they’re tremendous fun, ownership is often a challenging and wallet-draining experience. I also own a Vespa GTS and although it’s by far the most capable scooter I’ve ever owned I do sometimes struggle to love it. If only there was a scooter that combined the best of both worlds. Something that was fun, looked good and exuded reliability. Surely that would be a machine capable of converting all but the most ardent of two-stroke devotees? When Royal Alloy revealed their Tigara Grande ( TG)…

Dean Wilkins’ P range Vespa is one of those proverbial wolves in sheep’s clothing kind of scooters. A cursory glance is all Dean’s well-loved/used workhorse Vespa would usually attract when parked up. Don’t judge a book by its cover goes the old pearl of wisdom, a phrase that suits this Vespa perfectly. It’s not just a Quattrini 244, it’s a home converted/tuned 261cc. Dean’s day job is working on the UK railway network as a highly skilled specialist fault-finding, and fixing, engineer. He put his abilities, skills and know-how to very good use, carrying out practically all the upgrading work on his motor himself, as well as tweaking it, ‘a bit’ too. The project evolves… Aspirations and best intentions often tend to mutate from the planning stage to something different…

Name of scooter: SX600 Scooter model: Lambretta Bitsa Time to build & by who: Built by me over three years, on and off Engine: Kawasaki ZZR600 (100bhp) Carb: Four Mikuni flat slides Exhaust: Handmade by Pulse Fabs Clutch: EBC Redline Tyres: Pirelli Diablo Suspension: Ohlins Cable brand: Venhill Engineering Seat: Baby Ancillotti Brakes: Twin front disc with anti-dive, rear disc also. Describe engine performance and scooter handling: Wild! Thanks to: Frank Isles, my friend, for his engineering expertise. Tony at Pulse for the exquisite exhaust. Phil Bolitho and Ronja for the great pictures.…

1) Check engine oil 2) Check cowlings 3) Inspect exhaust for cracks or leaks 4) Tighten all casing nuts 5) Check fuel flow from the petrol tap 6) Check carburettor and rubber manifold mount 7) Look at spark plug for correct colour Dark brown – correct Light brown – check fuel system 8) Inspect HT cap, lead, and CDI unit 9) Clean casings when there is a build-up of film ■ Carry out an oil change in the transmission after 1000 miles ■ Listen for any change in the engine note ■ Be aware of both gradual and sudden power loss – inspect for reasons…

Name of scooter & reason: Dark Destroyer – it’s dark, sharp and fast... plus Nigel Benn is one of my all-time favourite boxers Scooter model: API 150 Inspiration for project: Wanted a performance winter series 2 Time to build and by who: Approximately six months (on and off) by Kitey from Berwick. ENGINE SPEC Kit: SSR250. Crank: Casa Carb: 34mm Dell’Orto with Casa trim Exhaust: Casa Clutch: Casa Gearbox: MB five-speed Dyno done by: Wilkinson Racing What brand of oil do you run?: Putoline, Castrol or Exol fully synth. CHASSIS SPEC Tyres: Heidenau Rims: Casa Suspension: BGM front / PM rear Speedo: SIP Grips: Biltwell Diamond Levers: Casa brake and MB dog-leg clutch Cable brand: MB Braided Seat: Corky, two piece one-off Fuel tank & Tap: Oiltek and fast-flow Hubs:…

Name: Paul Bradfield Job: Electrical mechanical engineer Scooter club & town: Maidenhead First got into scooters: 1983 First scooter: Vespa 50/75 special First ever rally: Morecambe How did you get there?: Two-up on my Vespa 50/75cc Any funny stories?: Showing off in front of a group of girls I pulled a wheelie and fell off the back Favourite rally: Isle of Wight back in the 1980s Least favourite rally: Maybe I’m getting old but I seem to enjoy the local club rallies as I can only drink for one day nowadays Funniest experience involving scooters?: Pissing in one of my mate’s tanks that we didn’t like much and his slow Vespa overtook all of us (though he did break down) Furthest you’ve ever ridden on a scooter?: Morecambe What do…

Cadwell was a first for rookie racer Phil Hallam, and surprisingly so was the scooter in question. Though he has ridden scooters for years, his choice has always been the series 2. Practise was taken at a delicate pace while he came to grips with the new machine. With a first lap time of 2m 48s, there was huge room for improvement and over the weekend he knocked an incredible 23 seconds off that, recording his fastest time of 2m 25s. Over the weekend Phil raced in the production class four times, and to get more track time he also entered three group 6 races as well. Though at the back of the grid, he completed all the races whereas others had the odd reliability issue and did not. The…

Away from the stage though, singer and band leader Millie has a different side. Coming across on stage as confident and sassy, this image hides a history of mental health issues, ones that she’s more than happy to discuss, and even make generally positive songs from. A complex woman, but one who was (thankfully) happy to talk to Scootering in the run-up to the release of the band’s debut album Telling Truths, Breaking Ties. So come on then Millie, tell us all... “I’ve got my parents to thank for my interest in music. My dad was into a wide range of pop music, anything from out-and-out pop through punk and ska and... well, pretty much anything. I remember dancing away in my bedroom to Sweet’s Wig Wam Bam, and dancing…

✎ Classic Scooterist, PO Box 99, Horncastle, Lincs LN9 6LZ ✉ mauspencer@classicscooterist.com ☎ 01507 529408 EDDIE YATES, RIP A stalwart member of the Manchester Lyons SC, Eddie Yates passed away on August 15, 2020, after suffering a heart attack the previous day. I’d known and corresponded with Eddie for several years, although I didn’t meet him until 2017 while compiling an article about the Manchester Lyons SC (arguably the longest-running all makes UK scooter club). Eddie wasn’t one of the original club members (he joined in 1966), but over time he became the unofficial archivist for what was to become one of the most prolific UK scooter clubs whose members went on to dominate scooter sport. On behalf of myself and Classic Scooterist readers, we send our condolences to Eddie’s wife…